For your application you'll need to use one of our universal RV trailer hitches like the Curt Hitch # C13704. This fits by bolting or welding it to the frame of the vehicle and is compatible with frames that are 22" - 66" wide.
Attached is a review video and installation instructions for you to check out. If this doesn't match up with the width of your frame please let me know what your frame measures and I'd be more than happy to help you find a solution from the linked selection. view full answer...
Good news, I was able to go out and measure the outside diameter of the Lippert Drain Hose # LC359724.
The measurement I got was 3 inches for the outer diameter of the drain hose. The measurement for the molded end of the hose was 3-1/2 inches.
I have linked some images of the measurements for your convenience. view full answer...
I went out to the warehouse and pulled the Lippert Waste Master RV Sewer Hose # LC359724 to measure the 90 degree end with the lever and handle. The overall length from the furthest point forward to the end of the handle is 8 inches.
The overall height is 10-1/4 inches. And it is approximately 4-3/4 inches thick. I have included a link to the manufacturer's demo video for you. view full answer...
I checked with SuperSprings (the manufacturer of SumoSprings) and can verify the following are indeed a fit for your Tiffin Allegro Open Road built on a 2008 Freightliner FRED chassis:
- Front Axle: SumoSprings Solo Custom Helper Springs # SSF-501-40
- Rear Axle: SumoSprings Solo Custom Helper Springs # SSR-502-54
These are going to do a superb job of helping with sway, giving you a smoother ride, and improving handling. Each of the springs works independently which is what is going... view full answer...
On the Allison transmissions you would need to go to a larger hose and fittings to avoid any problems when using a transmission cooler such as # D13403. But what I recommend is to use core # D54012 which does have -12AN fittings already. The largest inner diameter hose we have is 1/2 inch such as # D15799 so if you do need larger hose it would need to be obtained locally. view full answer...
For a 2007 Safari Simba Toy Hauler Class A Motorhome with a Freightliner XC Chassis you'll want the Roadmaster Exact Center Steering Stabilizer # RM36RR for a GVWR under 22k or the Roadmaster Exact Center Steering Stabilizer
Item # RM73RR If your GVWR is 22k or more.
To complete the installation you'll also need the Custom Mounting Brackets for Roadmaster Reflex Steering Stabilizer # RM-RBK18. These custom fit brackets require no drilling or welding for a quick and simple installation.... view full answer...
There are helper spring options for your 2008 Tiffin built on the Freightliner FRED Chassis with a 26000lb GVWR.
For the front you will need the SumoSprings Solo Custom Helper Springs - Front Axle # SSF-501-40, and for the rear you will need the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-502-54.
These helper springs will help to minimize sway and support the front and rear suspension of your motorhome.
I included videos for each of the products mentioned for you to take... view full answer...
Go To Results